Tub Drains - Bathtub Deep Water Overflow Cover

This Deep Water Overflow Cover adds 1-3 inches of water depth to your tub. It is made of clear vinyl treated with fungicide to resist mildew and offers 12 suction cups to hold it in place over the overflow opening and a 1-inch diameter hole at the top of the overflow cover to release the excess water into the overflow outlet. IMPORTANT: If you have a drain with a chain and stopper, you will either have to disconnect the chain OR cut the rim around the 1-inch diameter hole to allow the stopper to pass through. PLEASE NOTE: Tub Spout must project a minimum of 2-inch in order to clear the cover. Metal overflow plate shown in picture is not included.

Strom Plumbing Porcelain Overflow Cover & Stopper Keeper

Strom Plumbing offers this attractive porcelain overflow plate. It offers an extra inch of water depth in your tub and also has a place to store the rubber stopper when not in use. It measures 3-1/4-inch in diameter.

Strom Plumbing Short Chain Stay & Stopper

Strom Plumbing (Sign of the Crab) manufactures this petite chain stay (18 inch long) & stopper. 1 1/2 inch base diameter; 1 1/8 inch tall. Available in polished nickel, supercoated (non-tarnishing) brass and chrome.

Strom Plumbing Pop-Up Drain

Strom Plumbing (Sign of the Crab) manufactures this pop-up drain with overflow holes - for use with sinks that have an overflow hole. Available in supercoated (non-tarnishing) brass and chrome. Specifications: Fits 1 1/2 inch opening; 1 1/4 inch OD tailpiece, flange measures 2 1/4 inch wide. Please Note: Only the supercoated brass finish is guaranteed for as long as the original purchaser owns their home.

Strom Plumbing Lavatory Drain with Chain & Stopper

1-1/4 inch lavatory drain with chain and rubber stopper. Flange measures approximately 2-7/16 inch wide and the unit has overflow holes - for use with sinks that have an overflow. Available in your choice of brass, chrome, and supercoat finishes.

Elizabethan Classics Lavatory Drain with Chain Stay

This Elizabethan Classics lavatory drain with rubber stopper, crumb catcher and chain stay is available in chrome, polished (non-tarnishing) brass, satin (brushed) nickel, weathered copper, and oil rubbed bronze. It comes with overflow hole for use with sinks that have an overflow.

SUNRISE SPECIALTY Bracket for the S48 Drain and Overflow

This bracket is used to secure the Sunrise Specialty supply lines model number S433 or the S438 free-standing tub faucets to the S48 tower drain and overflow. This brace is available in polished brass (will tarnish), supercoated polished brass (will not tarnish), polished chrome, old bronze, polished nickel or brushed nickel finishes. These bath tub drains are the perfect complement to your clawfoot tub In addition.

Herbeau Creations Grid Strainer

1 inch waste outlet; Recommended for use with the hc0409-20 or hc0411-59 vessel sinks. SPECIFICATIONS: 2 3/4 inch Overall Diameter; Designed for sinks with no overflow holes.

Sink Drain - Lavatory P Trap and Escutcheon Kit - BrassTech (Newport Brass)

Newport Brass manufactures this 3013 Series P trap and escutcheon kit. The 17 gauge drain has 1 1/2 inch openings (will also fit a 1 1/4 inch tailpiece). The escutcheon has a 3 inch outside diameter, 1 1/2 inch internal diameter and measures 1 3/4 inch high. Available in chrome, polished brass, oil rubbed bronze, and satin nickel.

Herbeau Creations Garbage Disposer Stopper

Designed to fit all In-Sink-Aerator models; Will also fit Kitchen Aid, Emerson, Kenmore, and Grainger; Recommended for use with the hc4513 garbage disposer flange.

Herbeau Creations Garbage Disposer Flange

This Hearbeau Creations disposer flange is designed to fit all In-Sink-Aerator models. Designed to fit all In-Sink-Aerator models; Will also fit Kitchen Aid, Emerson, Kenmore, and Grainger; Shown in Satin Nickel: hc4514 disposer stopper sold separately.

KOHLER Iron Works Pop-Up Bath Drain

Kohler offers this Iron Works 1-1/2 inch Pop-Up Bath Drain with tailpiece to fit the Iron Works Historic Bath or the Iron Works Tellieur Bath. This drain is designed to work with the Kohler Antique Freestanding Bath Faucet and has an area on the back of the overflow tube where the supply line brace threads into. Features 17-gauge brass and an adjustable trip lever pop-up drain. This drain can be used for above- or through-the-floor installations. Additional finishes available.

Clawfoot Tub Drain - Bathtub Tower and Overflow - Sunrise Specialty

Keep showering essentials within reach with this Sunrise Specialty riser mount shampoo and soap holder. It is designed to hold a bottle of shampoo and a bar of soap. This solid brass holder must be installed when your Sunrise Specialty shower enclosure is being put together. Please note: This holder will fit only on Sunrise Specialty enclosures.